The Best Printer Heating Controller Mks Mosfet

0
949 reviews analysed

1. New Arrival 3D Printer Parts Heating-Controller MKS MOSFET for Heat Bed/Extruder MOS Module Exceed 30A Support Big Current

New Arrival 3D Printer Parts Heating-Controller MKS MOSFET for Heat Bed/Extruder MOS Module Exceed 30A Support Big Current

Feature

Description

Reference Weight:0.14kg (0.31lb.)
Product

Descriptions:

Advantages : 1. Each one will be done functional test . 2. Superior performance of MOSFET (Max 280A). 3. Extra large heat sink , the maximum current can be up to 30A or more. 4. Can use hot bed output signal of Ramp1.4 and MKS series to control . 5. Can use digital signal of 5-24v to control . Usage : 1. Connect Power to power source, please note the anode and cathode. 2. Connect Hotbed to heated wire , please note the anode and cathode. 3. Connect digital control signal to Gnd,D8. 4. Connect the control signal of Ramps1.4 or MKS MOSFET to -Bed+ 5. Choose one signal group to connect.
Package Included:
1 x MOS module

2. 3D Printer Parts Hotbed Heating-Controller MKS MOSFET for Heat Bed/Extruder MOS Module Exceed 30A Support Big Current

3D Printer Parts Hotbed Heating-Controller MKS MOSFET for Heat Bed/Extruder MOS Module Exceed 30A Support Big Current

Feature

Description

Model Number::Extruder MOS module exceed 30A Dissipation Power::1 is_customized::Yes Type::Voltage Regulator Condition::New Brand Name::CFsunbird Supply Voltage::1 Operating Temperature::MKS MOSFET for Heat Bed

3. 3D Printer – 3D Printer Heating Controller MKS MOSFET for Heat Bed/extruder MOS Module Exceed 30A Support Big Current for Ramp1.4

3D Printer - 3D Printer Heating Controller MKS MOSFET for Heat Bed/extruder MOS Module Exceed 30A Support Big Current for Ramp1.4

Feature

Description

Descriptions:
Advantages :
   1. Each one will be done functional test .
   2. Superior performance of MOSFET (Max 280A).
   3. Extra large heat sink , the maximum current can be up to 30A or more.
   4. Can use hot bed output signal of Ramp1.4 and MKS series to control .
   5. Can use digital signal of 5-24v to control .
Usage :
   1. Connect Power to power source, please note the anode and cathode.
   2. Connect Hotbed to heated wire , please note the anode and cathode.
   3. Connect digital control signal to Gnd,D8.
   4. Connect the control signal of Ramps1.4 or MKS MOSFET to -Bed+
   5. Choose one signal group to connect.
Note:
No retail package.
Transition: 1cm=10mm=0.39inch
Please allow 1-2cm error due to manual measurement. pls make sure you do not mind before you bid.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package includes:
1 x Heating-controller MKS MOSFET for heat bed/extruder MOS module
.
Item specifics:
Model number: GUGUJI222
Item type: MKS Mosfet

4. 3D Printer – Heating-Controller MKS MOSFET for Heat Bed Extruder MOS Module Exceed 30A 3D Printer Accessories

3D Printer - Heating-Controller MKS MOSFET for Heat Bed Extruder MOS Module Exceed 30A 3D Printer Accessories

Feature

Description

Advantages :
1. Each one will be done functional test .
2. Superior performance of MOSFET (Max 280A).
3. Extra large heat sink , the maximum current can be up to 30A or more.
4. Can use hot bed output signal of Ramp1.4 and MKS series to control .
5. Can use digital signal of 5-24v to control .
Usage :
1. Connect Power to power source, please note the anode and cathode.
2. Connect Hotbed to heated wire , please note the anode and cathode.
3. Connect digital control signal to Gnd,D8.
4. Connect the control signal of Ramps1.4 or MKS MOSFET to -Bed+
5. Choose one signal group to connect.
Package includes: (Without retail package)
1 x Heating-controller MKS MOSFET for heat bed/extruder MOS module
Item specifics:
Model number: 7HH300690
Item type: MKS Mosfet

5. 3D Printer – Heating-Controller MKS MOSFET for Heat Bed Extruder MOS Module Exceed 30A

3D Printer - Heating-Controller MKS MOSFET for Heat Bed Extruder MOS Module Exceed 30A

Feature

Description

Advantages :
1.  Each one will be done functional  test .
2.  Superior performance of  MOSFET (Max 280A).
3.  Extra large heat sink , the maximum current can be up to 30A or more.
4. Can use hot bed  output signal of  Ramp1.4 and MKS series  to control .
5. Can use digital signal of 5-24v to control .
Usage :
1.  Plug a power supply .
2.  Connect to heated bed  .
3.  Connect digital control signal to GND,D8 of MKS MINI.
4.  Connect  to the heated bed signal on Ramps1.4 or MKS series controller boards.
Notics:
1)Only can choose 3 OR 4 signal group .
2)Pay attention to polarity.
packing list:
1X 3Dprinter heating-controller  MKS MOSFET
.
Item specifics:
Item type: Module
Model number: MOS 30A

6. MKS MOSFET 3D printer heating controller for heat bed extruder MOS module Exceed 30A Big Current support

MKS MOSFET 3D printer heating controller for heat bed extruder MOS module Exceed 30A Big Current support

Feature

Description

DESCRIPTION: This item is manufactured with premium material for durable and long lasting use. This high power module is a general add-on heated bed power expansion module for 3D printer. Equipped with large heatsink, the maximum electric current is above 30A. You can use Ramp1.4 or heatbed of MKS mainboard directly to output signal control. SPECIFICATIONS: Max. Current: 30A Size: 66.6*32mm/2.62*1.26″ Weight: 40g(approx.) PACKAGE INCLUDES: 1 x Control Module NOTE: 1. Please allow 1-3cm error due to manual measurement. Thanks for your understanding. 2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

7. 3D Printer Parts Heating Controller MKS MOSFET for Heated Bed/Extruder MOS Module Exceed 30A Support Big Current

3D Printer Parts Heating Controller MKS MOSFET for Heated Bed/Extruder MOS Module Exceed 30A Support Big Current

Feature

Description


Descriptions:

We provide one-stop 3D printer boards & partspurchasing.
Help you tobuilt your 3D Printingdream easily and conveniently.
Click
Here
to built your dream.
1. Each one will be done functional test .
2. Superior performance of MOSFET (Max 280A).
3. Extra large heat sink , the maximum current can be up to 30A or more.
4. Can use hot bed output signal of Ramp1.4 and MKS series to control .
5. Can use digital signal of 5-24v to control .
1. Plug a power supply .
2. Connect to heated bed .
3. Connect digital control signal to GND,D8 of MKS MINI.
4. Connect to the heated bed signal on Ramps1.4 or MKS series controller boards.
1)Only can choose 3 OR 4 signal group .
2)Pay attention to polarity

Conclusion

By our suggestions above, we hope that you can found Printer Heating Controller Mks Mosfet for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Preview
Logo
Enable registration in settings - general