We spent many hours on research to finding laundry hose bib, reading product features, product specifications for this guide. For those of you who wish to the best laundry hose bib, you should not miss this article. laundry hose bib coming in a variety of types but also different price range. The following is the top 9 laundry hose bib by our suggestions
671 reviews analysed
1. LDR 500 2184BK 360-Degree Swivel Aerator Hose for Kitchen Laundry and Bar Faucets, Chrome
LDR 500 2184BK 360-Degree Swivel Aerator Hose for Kitchen Laundry and Bar Faucets, Chrome. The 360-degree swivel aerator with flexible hose. The hose works perfectly for most kitchen, laundry tub or bar faucets. The faucet mounts easily to standard fittings. Two-action system allows stream or wide-spray options with simple pull. The flexible hose allows more area coverage and remains in the position you set it in even when not in use (at any angle).
From the Manufacturer
Swivel Aerator W/Hose Black
2. Camco Water Bandit -Connects Your Standard Water Hose To Various Water Sources – Lead Free (22484)
- Connects a hose to unthreaded faucets or those with stripped threads
- 3-1/4″ long and attaches to any standard size faucet
- Stop wasting water due to poor connections
- Not intended for use under pressure
- Compliant with all federal and state level low lead laws. CSA Low Lead Content Certified to NSF/ANSI 372
Camco’s Water Bandit connects your standard water hose to would-be-unattachable water sources. One end connects to a standard water hose, via a brass, male, standard water connection. The other end – a highly -flexible, silicone-polymer sleeve – stretches to fit over the end of virtually any standard water source; those with damaged or stripped threads and even to water sources with no threads at all.
Stop Leaky Water Connections
Leaky hose connections can be annoying, messy and wasteful, but they are also preventable with Camco’s Water Bandit. A faucet with damaged threads can mean constantly muddy conditions around the faucet and can cause you to get wet each time you turn the water on. The Water Bandit solves these problems and many more.
Connect your hose to the Water Bandit by screwing the hose onto the threaded brass end. Then simply slide or twist the rubber end of the Water Bandit onto the leaky faucet or water connection until it is fully attached. It’s that easy.
You can even connect Water Bandit to a standard unthreaded faucet to refill your fresh water tank. Connect Water Bandit to your fresh water hose, slide over the threadless connection and you’re ready fill.
Works With Many Types of Faucets
Water Bandit quickly connects to most standard hoses. It will work with damaged or stripped faucet threads and even faucets with no threads at all! NOTE: Discharge end of hose must remain open while in operation. Water Bandit is not designed to hold back pressure. Never leave Water Bandit connected while unattended.
Not intended for use under pressure. Keep the other end of your water hose open or the pressure will pop the Water Bandit off the spigot.
- Quick and easy installation – just slip over damaged faucet and screw hose on threaded end
- Perfect for indoor and outdoor use
- Connects to damaged or threadless faucets
- Perfect solution for leaky hose connections
One Year Limited Warranty
Limited Warranty: Camco warrants this product to be free from defects in material and workmanship under normal use and service conditions for 12 months from the date of first purchase. Camco’s liability is limited solely to the replacement of any defective product returned in to us. To the extent allowable by law, Camco makes no other warranty, either expressed or implied, nor assumes any liability for incidental or consequential damages resulting from the use of this product or for breach of warranty of merchantability or fitness for a particular purpose. Submit warranty claims to Camco Manufacturing, 121 Landmark Drive, Greensboro, NC 27409.
About Camco Manufacturing
Camco started in 1966 with one employee and one product. Today, over 40 years later, we have more than 350 employees, over 3,000 products and five manufacturing facilities to better serve our customers’ needs. Our home office is in Greensboro, North Carolina. We also have locations in Elkhart, Indiana; Portland, Oregon; Leominster, Massachusetts and our newest facility in Beilun, China.
Competitive pricing, superior service, quality products and customer satisfaction are the foundations upon which Camco operates. Our friendly, knowledgeable customer service staff stands ready to assist our customers with any questions. At Camco, we take pride in meeting the ever changing demands of a challenging marketplace while serving you, our most valuable asset.
3. Gilmour 813004-1001 TV165753 2-Way Connector, Brass
Controls water flow for two hoses. Heavy-duty brass construction. Extra large handles for easy grip & turn.
From the Manufacturer
Gilmour’s quality-made brass shut-off connectors are built to last. They’re redefining heavy-duty.
4. Plumb Pak PP800-17 Faucet Aerator, 3-3/4 in H X 1-7/8 in W, Quart, Gray
5. Sharkbite 25560LFA Washing Machine Angle Valve, 1/2 inch x 3/4 inch MHT Garden Hose Valve, Push-to-connect Copper, PEX, CPVC, PE-RT Pipe
- INSTALLS IN SECONDS: 1/4 turn washing machine angle hose valve requires no special tools, no soldering, no crimping, unions or glue. Just push to create a watertight seal
- COPPER, PEX, CPVC: SharkBite fittings fit copper tubing, CPVC, PEX or PE-RT
- QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection
- CERTIFIED: SharkBite fittings are certified to 200 PSI and 200°F and can be reused up to four times
- RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications
SharkBite Washing Machine Angle Valve
The SharkBite lead free brass washing machine angle valve is a quarter turn angle water valve with mounting brackets. Intended for use in washing machine installations with no washing machine outlet box. This valve controls water supply and minimizes the risk of flooding. The valve is mounted to a stud or joist and features a 1/2″ inlet and a 3/4″ standard garden hose thread outlet connection.
CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal. No soldering, no clamps, no glue.
Our product works with your existing plumbing, is easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces. Perfect for joining Copper, PEX, CPVC or PE-RT pipe, SharkBite is the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.
6. Aquatic Life Buddie Fit Hose Bib x 1/4" Quick Connect, 2-Pack
Aquatic Life Buddie Fit connectors make it easy to plumb 1/4 inch OD tubing by simply pressing the tubing into the gripping end of the connector and then using the included retainer clip to lock the seal. The connector features a Buddie Fit Press 1/4 inch connection on one end and a standard Female Garden Hose Bib connection on the other end. The connector ensures an easier working environment in confined spaces and removes the need for tools (no torches, crimpers or glues). Two Buddie Fit connectors and retainer clips are included.
7. Eastman 60349N Rubber Washing Machine "Y" Mixer Hose 3/4" FHT, 1 Ft Length
- LENGTH: The length of each ‘Y’ leg is 12-inches
- 3/4-inch FHT x 3/4-inch FHT
- MATERIAL: This hose connector is made of high-quality, heavy-duty rubber which prevents leaks and provides strength and durability
- the flexible supply line resists corrosion
- COMPATIBILITY: An excellent high-quality washer hose connector which can connect to both hot and cold faucets
- BURST-PROOF: This Y mixer hookup is designed so that it can withstand high-pressure with ease
- EASY INSTALLATION: Designed to install easily and efficiently
8. BrassCraft Mfg SF0204X Faucet Aerator AERATOR-3/4 FEM Garden Hose THD
Female Thread Faucet Aerator with 3/4″ Female Garden Hose Thread. Spotless. 2.0 GPM /8.3 LPM. Chrome Plated. No-Lead Brass.
From the Manufacturer
Female Thread Faucet Aerator with 3/4″ Female Garden Hose Thread. Slotless. 2.0 GPM /8.3 LPM. Chrome Plated. No-Lead Brass
9. Twinkle Star Garden Hose Splitter 2 Way, Y Connector Brass Garden Hose Adapter
By our suggestions above, we hope that you can found Laundry Hose Bib for you.Please don’t forget to share your experience by comment in this post. Thank you!