Finding your suitable readers for laptop hard drive external caddy is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for laptop hard drive external caddy including detail information and customer reviews. Let’s find out which is your favorite one.
618 reviews analysed
1. Sabrent USB 3.0 to SATA External Hard Drive Lay-Flat Docking Station for 2.5 or 3.5in HDD, SSD [Support UASP] (EC-DFLT)
- Supports all 2.5 and 3.5-inch SATA drives
- Connects via SuperSpeed USB 3.0 (up to 10x as fast as USB 2.0).
- UASP (USB Attached SCSI Protocol) support for even faster performance. UASP requires UASP capable host system.
- Serial ATA bus up to 6Gbps Signal bandwidth for fast storage backups
- This Docking station comes with a free download of Acronis True Image for Sabrent software for easy cloning.
The Sabrent EC-DFLT SATA Lay-Flat Docking Station supports the direct insertion of Desktop 2.5″/3.5″ SATA Hard Drives. It is a caseless solution that makes swapping hard drives easier than ever before. Plus, now you can take advantage of the lightening speed of USB 3.0 to quickly transfer files up to 5 Gbps!
2. Sabrent USB 3.0 to SATA I/II/III Dual Bay External Hard Drive Docking Station for 2.5 or 3.5in HDD, SSD with Hard Drive Duplicator/Cloner Function [10TB Support] (EC-HD2B)
The Sabrent SATA Hard Drive Docking Station enables you to access desktop or laptop hard drives, without the frustration of assembling hard drive enclosures. By inserting a 2.5"/3.5" SATA hard drive directly into this docking station, you can quickly access drive contents and transfer files. Plus you can swap out hard drives effortlessly with plug and play mounting. Transfer data quickly and easily through USB 3.0 at speeds up to 5Gbps.
To use Hard Drive Offline Clone Function:
1. Insert Source Disk into hard drive bay A, then insert Target Disk into hard drive bay B.
2. Make sure that the USB cable is disconnected from your computer.
3. Connect power supply and switch on power.
4. Hold down the CLONE button, release when you see a Blue LED.
5. Then quickly press the CLONE Button.
6. A Blue LED will flash on 25% indicating that the cloning process has begun.
7. The cloning process is complete when ALL the lights turn solid Blue (25%-100%).
8. Finally press the power switch to the OFF position and eject your drives.
• MAC: OS
• Docking Station
• Power Supply
• USB 3.0 cable
• User Manu
3. WEme USB 3.0 to SATA/IDE Adapter with Universal 2.5"/3.5" Hard Drive Disk Converter for HDD/SSD & IDE HDD, Support 6TB and One-Touch Backup, Include 12V 2A Power Adapter + USB 3.0 Cable for Laptop
- Connect your SATA / IDE device to your computer as an additional external hard drive via USB 3.0. Compatible with 2.5″/3.5″ IDE/SATA hard drives and IDE/SATA CD/DVD drives. Compatible read up to three hard drives simultaneously!
- One Touch Backup (OTB) function. On/Off Switch for HDD protection. Hot- swappable with Super-Speed USB 3.0 interface. Plug and play without rebooting
- Plug and Play, no driver needed, if your computer is pop up that driver install needed when connecting, that means computer OS lacks of ” USB mass storage drive”, please ensure your device have install ”USB mass storage drive” before using
- Support 2 IDE and 1 SATA hard drives connecting simultaneously! Compatible with two IDE hard drives simultaneously, If not, Please set the 3.5” IDE to be the slave drive based on the instruction on the hard drive
- SuperSpeed USB 3.0 enables data transfer rates of up to 5Gbps, downwards compatible with USB 2.0(high-speed 480 Mbps) / USB 1.1(full-speed 12 Mbps) standards. The actual transmission speed subjects to the setting of the device connected
WEme USB 3.0 to SATA/IDE hard drive converter is a perfect solution for data transfer and backup in the 2.5″/3.5″ hard drive. This item lets you swap hard drives easier than ever before as it ensures stable external connection between any 2.5″ or 3.5″ SATA Hard Drive. Using its USB 3.0 Interface, you can connect any 2.5″ or 3.5″ SATA/IDE drive to your Ultrabook Notebook Mac or PC, and experience blistering file transfers as fast as 5Gbps speed.
– Compatible with USB 3.0 computer systems such as Mac & MacBook & Lenovo & Dell Optiplex & Asus & Samsung ect
– Supported Drives: 2.5″/3.5″ SATA HDD/SSD, 2.5″/3.5″ IDE HDD, CD-ROM, CD-RW, DVD-ROM, DVD+RW, DVD-RW. Supports up to 10 TB drives
– Supports most models of CD/DVD-ROM/RM drives comprising of an IDE or SATA interface on the market
– On/Off Switch for HDD protection, you can be switched off when not in using
– Dual-Head IDE Connector (40pin and 44pin) plus one SATA II Connector
– One-click backup feature to effectively secure precious data
– Support 2 IDE hard drives and 1 SATA hard drive connecting simultaneously. Compatible with three hard drives simultaneously!
Compatible Operating Systems:
Windows XP /Vista/7/ 8 /8.1 (32/64-bit), Win 10, Mac OS 10.10 or higher
1. OTB (One Touch Backup) function isn’t applicable for Mac OS, only be used on usb connection under Windows system.
2. When connecting to a 3.5-inch HDD/SDD, please power the product with the provided AC adapter to ensure the stable operation.
3. Some components inside this hard drive may be broken along with the aging problem, this may lead to automatically disconnected when transferring large files.
– 1 x USB 3.0 to SATA/IDE Adapter
– 1 x USB 3.0 Cable
– 1 x 4PIN Power Cable
– 1 x Power Adapter
– 1 x CD Driver
4. Unitek USB 3.0 to IDE & SATA Converter External Hard Drive Adapter Kit for Universal 2.5/3.5 HDD/SSD Hard Drive Disk, One Touch Backup Function and Restore Software, Included 12V/2A Power Adapter
- Support 2.5 “/3.5” SATA HDD and SSD
- 2.5 “/3.5” IDE HDD
- DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW Optical Drive. Dual-Head IDE Connector (40pin and 44pin) plus one SATA II Connector.
- Allow to operate three HDDs Simultaneously. Data transfer rates up to 5 Gbps, backward compatible with USB 2.0/1.1.
- Included 12V 2A power cable is for providing stable electricity supply. 4PIN Power Cable is designed for 3.5’’ IDE drive.
- Plug and play
- Hot Swap
- One Touch Backup function
- On/Off Switch for HDD protection. LED light shows power and activity status.
- What we offer: USB 3.0 to IDE+SATA Adapter, USB 3.0 Cable, 4PIN Power Cable, Power Adapter, OTB Software CD, 24h customer email support.
5. UGREEN 2.5" Hard Drive Enclosure, USB 3.0 to SATA III for 2.5 Inch SSD & HDD 9.5mm 7mm External Hard Drive Case Support Max 6TB with UASP Compatiable for WD, Seagate, Toshiba, Samsung, Hitachi
- 2.5″ External Hard Drive Enclousre: Easily connects your 2.5 inch SSD & HDD to PC, laptop, PS4, Xbox for data transfer or expanding storage. It protects the hard disk from outside scratches and makes SATA hard drive portable for data store. It is awsome for booting up old hdd/ssd and recovering important files of broken PC.
- 5Gbps with UASP Accelerated: The maximum data transfer speed of the USB 3.0 interface is 5Gbps. The SATA interface of this enclosure supports UASP accelerated transmission protocol, 70% Faster than conventional USB 3.0 when connected to a computer that also supports UASP. Backward compatible with USB 2.0 or 1.1 ports.
- Easy Installation: Tool free installation. Plug & Play, No driver needed for this SATA enclosure. Just push out the cover, plug in the drive, close the cover and go. Hot-swap supported. No request for extra power supply. 【Please click “Safely Remove Hardware” icon on your PC first then unplug it to avoid data loss when complete usage】
- Secure Hard Drive Friendly: The blue LED indicator let you know the working status easily. Attached EVA foams inside protects your hard disks from improper shaking and scratches. With detachable 30cm cable, it is quite flexible to connect and take along. (Note: If there are screws on your hard drive, you should remove it. Otherwise, it will not fit into our enclosure)
- Universal Compatibility: Supports Windows, LINUX, Mac OS 8.0 and above systems. Designed for 2.5 inch 7mm/9.5mm SATA HDD & SSD up to 6TB. Compatible with WD, Seagate, Toshiba, Hitachi, Samsung, Crucial, SanDisk, SSD and HDD with sata port and so on.
6. ORICO 2.5 External Drive Enclosure SATA to USB C 3.1 Gen2 6Gbps Transparent Hard Disk Adapter for 7/9.5mm HDD/SSD Tool Free Disk Case Support UASP Up to 4TB for Samsung,Xbox,PS4,Router
- [USB3.1 Gen2 6Gbps Enclosure] — The 2.5inch enclosure is adopted by usb3.1 gen2 port, with the VL716 mater chip can helps the transmission rate reach up to the maxinum sata rate for 6Gbps, UASP protocol supported and much faster than traditional usb3.0 port,smooth transfer, no delay for the data.
- [Transparent Design] — The 2.5 hard disk enclosure is made by high quality PC board, with the advantage of anti shock and also helps you to monitoring the hard drive working status easily and distinguish the data you want, no need to open the enclosure cover.
- [Tool Free Installation] — No any tools and screws needed, you can easily slide the cover of the 2.5 disk enclosure and insert your hard drive in, just plug and play. The led indicator can inform you when your hard drive is fuctioning at maximum capability, also compatible with Windows, Mac and Linux.
- [Widely Compatibility] — The 2.5 external hard drive enclosure can support 2.5inch sata port hdd and ssd which the height of the hard drive is 7-9.5mm. The max 4TB capacity can helps you to read and write your videos, photos and musics you like. Also can compatible with PC, TV, PS4, xbox and other devices.
- If for any reason you are dissatisfied with your purchase, just let us know and we promise to make it right. Note: This enclosure ONLY comes with a USB Type C to USB A cable. For using with Mac, pls make sure to use a USB-C to USB-C cable(Not Included).
7. Nimitz 2nd HDD SDD Hard Drive Caddy for MacBook Pro Unibody with External USB Enclosure
- Add a 2nd drive to your macbook pro by replacing your superdrive
- Newest version, without bottom cover, the lower case of the macbook pro can be closed strictly.(pictrue #6)
- This item only fits unibody models (Late 2008/Early 2009/Mid 2009/Late 2009/Early 2010/Mid 2010/ 2011/2012),Not Compatible for Retina Macbook Pro.
- Package Content:1x 2nd hard caddy for Apple MacBook/ MacBook Pro,1x External USB enclosure including cable and screw,tools kit ( Torx T6x25mm screwdriver, Phillips 1.5x25mm screwdriver and spudgers)
- Note:the drives not included
Compatible: Unibody models (Late 2008-Mid 2012)
Model No:A1278 A1342
Order No: MB466LL/A MB467LL/A MB881LL/A MC240LL/A MC207LL/A MC516LL/A
Model ID: MacBook5,1 MacBook5,2 MacBook6,1 MacBook7,1
Model No:A1286 A1297 A1278
Order No: MB470LL/A MB471LL/A MB604LL/A MC026LL/A MB990LL/A MB991LL/A
MC118LL/A MB985LL/A MB986LL/A MC226LL/A MC371LL/A MC372LL/A MC373LL/A
MC374LL/A MC375LL/A MC024LL/A MC700LL/A MC721LL/A MC723LL/A MC724LL/A
MC725LL/A MD035LL/A MD313LL/A MD314LL/A MD318LL/A MD322LL/A MD311LL/A
MD101LL/A MD102LL/A MD103LL/A MD104LL/A
Model ID: MacBookPro5,1 MacBookPro5,2 MacBookPro5,3 MacBookPro5,4 MacBookPro5,5
MacBookPro6,1 MacBookPro6,2 MacBookPro7,1 MacBookPro8,1 MacBookPro8,2 MacBookPro8,3
Accepts 2.5", 9.5mm-high SATA hard drives or less
Also compatible with 2.5" SSD
The hard drive is not included
8. ikuai SATA to USB 3.0 Dual Bay Hard Drive Dock for 2.5" and 3.5" SATA HDD SSD with SD TF Card Reader 2 USB 3.0 Ports and Offline Clone Function External Hard Drive Docking Station (UASP Supported)
- Dual Bay Docking Station: Supports Standard Desktop 2.5″/3.5″ SATA Hard Drives or SSD and UASP protocol, Supports hard drives up to 12TB.
- Offline Clone Function: Support offline clone, no drivers needed, easy installation
- cloning can only be done from A drive to B drive, make sure the memory capacity of B drive is larger/equal than A drive
- (The target disk must be larger/equal than the source disk )
- Stable & Reliable DC Power Source: The power supply is highly efficient (UL Listed DC 12V, 3A), stable and reliable power source guarantees a steady supply of energy. Automatic sleep mode after 10 minutes of inactivity saves energy.
- USB 3.0 Transfer Speeds: Super speed USB 3.0 data file transfers (up to 6 Gbps), 2 USB 3.0 port and SD/TF card reader in front, Plug and Play, no reboot or additional drivers needed, hot-swapping, easy and quick Tool-Free installation.
- Broad Compatibility: Compatible with Windows 2003 / XP / Vista / Win 7 / Win 8 / Win 10, Mac OS, Linux 9 and above, PS4 , PS4 Pro, Xbox 360, Xbox one, backward compatible with USB 2.0 connections.
9. HIGHROCK Hard Drive Caddy Tray 9.5mm Universal SATA 2nd HDD HD SSD Enclosure Hard Drive Caddy Case Tray, for 9.5mm Laptop CD/DVD-ROM Optical Bay Drive Slot (for SSD and HDD)
- 100% Brand New 9.5 mm-thick caddy.
- Compatible with: 2.5″/9.5mm SATA HDD or SSD, Hard drive NOT include
- It can be made part of RAID array and Bootable.
- Package Content: 1x 2nd HDD Caddy , 4x Hard Drive Screws
- PLAIN FACE PLATE
- HDD Interface: SATA
- Laptop/Mother Board Interface: SATA
- It enables you to add a second notebook hard disk drive to any modular bay.
This Hard Drive Adapter lets you add a second hard drive to the laptop systems. With a second hard drive, you can quickly store and back up critical data. Add this caddy to your laptop to give you another hard drive. Simply remove your CD/DVD-ROM drive and put the Caddy (with the added hard drive) in its place… This is a good working adapter and is guaranteed. — 100% brand new and high quality 9.5mm thick — Support: SATA — Support hard disk:2.5 HDD, SATA,SATAII,SDD — Size: 129mm*128mm*9.5mm How to use: — Unpack the New drive, lift the adapter retaining latch, the screw to the hard disk — Insert the drive into the Adapter at an angle — Slide the drive into the connector until it locks into place — Lower the adapter retaining latch until it snaps closed
10. ORICO USB 3.0 to SATA Dual Bay External Hard Drive Docking Station Enclosure for 2.5 or 3.5 in HDD SSD with Offline Clone/Duplicator Function [ 20TB Support ]
- ➤【20TB Capacity】: External Dual Bay hard drive docking station support up to 2x 10TB hard drives, Support 2.5 inch / 3.5inch SATA I II III HDD SSD hard drives simultaneously with Dual bay docking station
- ➤【5 Gbps Transfer Speeds】: USB 3.0 External Hard Drive Enclosure With the USB3.0 superspeed interface, the transfer speed reaches a maximum of 5Gbps and backwards, it is compatible with USB2.0 and USB1.1
- ➤【Standalone duplicating / Offline Clone operation】: Support hard disk cloner and duplicator with LED indicator, from A drive high speed to B drive clone copies, source HDD to target HDD without connect to computer
- ➤【Better Heat Dissipation Design & Tool-free】 Hard Drive Stock With the movable design, the hard drive is more stable and has better heat dissipation.Tool-free SSD HDD Docking Station, Plug and Play, No Driver Needed
- ➤【Compatible Operating System】: The Dual Bay Hard Drive Dock compatible with Windows XP/ VISTA/ Windows 7/ 8 /8.1/ 10/ Linux/ Mac 9.1/10.2 or higher
By our suggestions above, we hope that you can found Laptop Hard Drive External Caddy for you.Please don’t forget to share your experience by comment in this post. Thank you!