842 reviews analysed
1. Smittybilt 97495 XRC Winch – 9500 lb. Load Capacity
- 6.6 HP Amphibious motor and 3 Stage Planetary Gear System
- Completely Waterproof, state-of-the-art 500AMP Solenoid
- Waterproof IP67 rating
- It has a Corded Remote
- Smittybilt 97495 XRC Winch – 9500 lb. Load Capacity
- Kit comes complete with all wiring required for installation. Smittybilt recommends using supplied wiring.
- Smittybilt, Inc. offers a limited lifetime warranty for replacement to the original purchaser on stainless steel products. Dual-stage, powdercoated products carry a 5-year or 100,000 mile warranty, whichever comes first. After 3 years, the warranty is prorated up to 50 percent towards the replacement cost of the purchaser’s original price
Waterproofing: IP67 rating, fairlead: 4-way roller rated line pull: 9,500 pounds (4,309 kilograms) single-line, remote control: included motor: 6.6hp series wound, recommended battery: 650CCA minimum for winching, control: remote switch, 12 feet (3.7m) lead, battery leads: 25 square millimeter, 72 inch (1.83m), gear train: 3-stage planetary, gear ratio: 161.28:1, finish: textured black, weight: 78.0 pounds (35.0 k), clutch: sliding ring gear mounting, bolt pattern: 10.0 inch x 4.5 inch, brake: automatic in-drum, overall dimensions (L x W x H): 22.3 inch x 5.4 inch x 9.4 inch, drum size: diameter 2.5 inch, cable type: wire rope, cable: 93.5 feet 5/16 inch diameter, length: 10.0 inch (254mm). The XRC 9.5 is the next generation in winching technology.
2. The Hillman Group 831491 XL Washered Wing Nut 1/4-20 (1 Pack of 100)
Hillman 1/4-20 100 Pc. XL Washered Wing Nut. Wing Nuts can be used where frequent fastener connection adjustments or removals are needed and can be made quickly and often. Tools are not needed to install this product, to tighten simply turn the nut by hand. This nut has a wing on each side that helps you to tighten the nut without tools. Made of Zinc Die Cast, will not rust or corrode. These nuts have a built in washer. Various sizes available. Includes 1 pack of 100 pieces of wing nut per pack.
3. Ten Factory MG21102 Red Dana Axle Tube Seal, Pair (30/44)
This updated design of our original product helps to keep mud and debris out of your front axle tubes. Available in 3 different colors (red, black and silver), these fit XJ, YJ, TJ and JK front axles.
4. Kinetic Traxle – Thru Axle
The Kinetic Traxle is a precision-machined replacement axle for mountain bikes that easily adapts any 12mm thru-axle system to firmly lock into trainer cone cups. Specifically engineered to work on Kinetic trainers, the system is still adaptable enough to work with most other trainer brands making it a perfect solution for bike shop fitting stations and home-use alike. The Kinetic Traxle comes in 3 thread pitches, coarse, medium and fine, to fit most bike brands. Unlike stock thru-axles, the Kinetic Traxle has tapered heads that stand out just far enough from from the bike frame to fit into the cone cups on a Kinetic trainer. Bike frame manufacturers determine thread pitch on their frame sets. It’s important to know which thread pitch your bike uses before ordering a Traxle. For instance, DT Swiss makes axles based on manufacturer specifications not a standard single thread pitch, so refer to bike manufacturer to determine which Traxle you need. Compatible with Shimano rear axle designation including (but not limited to): Pivot, Yeti, Bianchi (14), Rocky Mountain, BH, Redline, Giant 27.5 models, Diamondback Models; Scapegoat, Slopestyle, Mission Series, Sortie 29 Series.
5. USA Standard Gear (ZA W24110) Replacement Axle Kit for Jeep 27-Spline Dana 30 Front Differential 4340 Chrome-Moly
USA Standard Chromoly axles offer greatly enhanced strength over OEM. Suitable for both street and off-road usage.
6. Yukon Gear 2.800 Inch AK C10 Gm 7.5/8.0/8.5/8.6 Inch Rear Axle Bearing And Seal Kit
Axle Bearing and Seal Kits from Yukon Gear and Axle use high quality bearings and seals designed for specific applications in differential systems.
7. RockyMounts StreetRod Thru-axle Adapter
The RockyMounts StreetRod is a thru-axle adapter that works with fork mounted bike racks from any manufacturer. It includes axles to accommodate bikes with 12×100, 15×100, and "Boost" 15×110 thru-axles. Bicycle weight limit is 35lbs with this carrier. Do not use with tandem bicycles Do not exceed the load capacity of your vehicle’s roof rack or bike carrier. RockyMounts StreetRod is not intended for use on Thule fork mounted bike carriers.Features: Works with fork mounted bike racks from any manufacturer. Includes axles to accommodate bikes with 12×100, 15×100, and "Boost" 15×110 thru-axles. Bicycle weight limit is 35lbs with this carrier. RockyMounts offers a lifetime warranty
8. Yukon Gear & Axle (YA W24110) Replacement Axle Kit for Jeep XJ/TJ/YJ Dana 30 Front Differential 4340 Chrome-Moly
Axles from Yukon Gear and Axle are made from high quality metals and alloys to provide higher strength over OEM for performance and replacement applications. Each axle is engineered for a specific differential installations. Yukon Axles can be found off-road, on the street and at the track.
9. Spicer 46470 Oil Seal
Genuine Spicer light vehicle axle products are manufactured to the same high standards as original equipment (OE) parts because they are OE parts. That means when an automotive axle part is replaced with a genuine Spicer part, you are getting the same performance and reliability you have come to expect. And because Dana is constantly revolutionizing the technology behind its Dana axles and Spicer products, the replacement car axle or component you purchase today may even exceed the standards set for the original equipment part that you are replacing.
10. ACTION 5/16X26Tpi 130mm Front Hub Axle Set
The action 5/16x26tpi 130mm front hub axle includes cones, locknuts, nuts, and axle. Bearings are sold separately.
By our suggestions above, we hope that you can found Jeep Hurricane Axle for you.Please don’t forget to share your experience by comment in this post. Thank you!