Top 10 Ivac Automatic Vacuum Switch Box

0
604 reviews analysed

1. i-Socket Workshop Automated Vacuum Switch – Power Tool Activated Sensor and Automatic Shutoff – Workshop Safety Device – For Contractors and Woodworkers

i-Socket Workshop Automated Vacuum Switch - Power Tool Activated Sensor and Automatic Shutoff - Workshop Safety Device - For Contractors and Woodworkers

Feature

Description

Style:Ships from Amazon

i-socket Workshop Automatic Dust Control Switch

Tired of safety feeling like a waste of time-I Want an easier, more efficient way to manage your shop that will protect you against harmful airborne debris?

Then look no further than the i-socket Workshop Automatic Dust Control Switch! Over 10 years of proven reliability, i-Socket by DGC Products is the gold-standard in workshop safety devices. The new Workshop i-Socket is an updated, improved design allowing you more flexibility and control than ever before.

Workshop Automatic Dust Control Switch Features & Benefits:

  • Updated Design w/ New Components and LED Indicators
  • Addition of a Mode Switch and Two Accessory Outlets
  • Supports a Wide Range of Cutting Tools
  • Runs the Vacuum Only While You’re Using Your Tool to Save Time and Electricity
  • Automatically Delays Vacuum Turn-Off by 7 Seconds to Continue to Clear the Air While the Motor Spins Down
  • Supports OSHA Requirements for Dust Control

    Technical Specs:

  • Dimensions: 4.25″W x 4.5″L x 1.5″D
  • Black Textured Finish
  • Durable UL-Rated 94V, ABS Plastic
  • Outlet Required: Standard 15 Amp, 120 VAC, 60 Hz Outlet
  • Power Rating: 15 Amp, 120 VAC, 60 Hz
  • Input Connector: 3 Prong (Grounded) Male
  • Tool Outlet Connections: 2 or 3 Prong Plugs
  • Actuation Threshold: ~0.5 Amps (60 Watts at 120V)
  • One (1) Power Tool Outlet
  • Two (2) Accessory Outlets
  • Mode Switch: Controls the Accessory Outlets from OFF, ON, and AUTO
  • Red Mode LED Indicator: AUTO Mode
  • Green Accessory LED Indicator: Accessory Receptacles Have Power

    About DGC Products

    . DGC launched the original i-Socket Autoswitch in 2006. Today, products based on i-Socket Technology can be found at a number of large retail hardware chains, woodworking and lumber supply chains throughout North America.

  • 2. iVac Pro Switch 115 Volt – 20 Amp #S11520NA

    iVac Pro Switch 115 Volt - 20 Amp #S11520NA

    Feature

    Description

    Conquer the dust problem in your workshop with iVAC’s automated dust control system! Connect any tool with a dust collection port, from your hand-held sander to your stationary cabinet saw, to iVAC’s system and breathe easier! At the heart of iVAC’s system is the Pro Switch, which automatically activates your shop vacuum or dust collector when you turn on a tool that is connected to the system. iVAC’s Pro Switch installation is simple! Just plug the unit into an outlet and plug the shop vacuum or dust collector in to the switch. Each power tool connects to the switch with its own Pro Tool Plus automatic sensor (available separately) that communicates with the switch via a wireless signal. iVAC Pro Switches include many convenient features designed to make your dust collection system even more flexible. The switches are equipped with a setting that allows you to delay the powering off of the vacuum by 5, 15, or 45 seconds after the power tool is turned off. This delay allows the vacuum to continue operating so that surface debris can be cleared from the tool. There is also a turn-on delay of 1.5 seconds to avoid power surges and tripped breakers. iVAC Pro Switches come in two power variants to accommodate vacuums up to 2HP. To accommodate more powerful vacuums (up to 10HP), an iVAC Contactor unit is also available. Each iVAC Pro Switch can accept signals from up to 8 different tools, which is more than enough capacity for the typical workshop. For larger needs, the system is designed to run up to four independent Pro Switches, which means up to 32 individual tools can be connected to a single system. This setup is ideal for school and professional shop environments. The iVAC S11520-A-NA Pro Switch is configured for 15- or 20-amp, 115-volt service and can accommodate a shop vacuum up to 1.5HP.

    3. iVAC PRO 240-Volt Remote Control for Dust Collectors

    iVAC PRO 240-Volt Remote Control for Dust Collectors

    Feature

    Description

    Automate your dust collector with the iVAC Pro Dust Collector Remote Switch! Choose the Remote Switch that matches your dust collector’s voltage, and enjoy the convenience of a remote control unit to turn your dust controller on and off with the press of a button. iVAC allows you to grow into a complete iVAC Pro system, including Tool Sensors and Blast Gates, and it’s capable of reliably driving 240V dust collectors up to 2HP repeatedly ON/OFF over and again – now that’s real power!Fully certified and approved with TUV safety approval and conforms to UL-CSA standardsHeavy-duty design for 20A operation of dust collectors up to 2 HP at 240ViVAC Pro Switch built for repeated use with high quality mechanical relay componentsUses high quality digital wireless system with 40′ rangePackage contents: 240V iVAC Pro Switch and iVAC Pro Remote

    4. iVAC PRO 115-Volt Remote Control for Dust Collectors

    iVAC PRO 115-Volt Remote Control for Dust Collectors

    Feature

    5. iVAC PBG04 Pro Electrically Driven Blast Gate. Automated Dust Control

    iVAC PBG04 Pro Electrically Driven Blast Gate. Automated Dust Control

    Feature

    6. EyeVac PRO Touchless Stationary Vacuum – 1400 Watts Professional Vacuum with Active Infrared Sensors, High Efficiency Filtration, Bag-Less Canister (Black)

    EyeVac PRO Touchless Stationary Vacuum - 1400 Watts Professional Vacuum with Active Infrared Sensors, High Efficiency Filtration, Bag-Less Canister (Black)

    Feature

    7. PSI Woodworking LR110-3 110-Volt Long Ranger Dust Collector Switch

    PSI Woodworking LR110-3 110-Volt Long Ranger Dust Collector Switch

    Feature

    8. iVAC S11520-A-NA Pro Switch 20 Amp 115 Volt Shop Vacuum Dust Collector Switch

    iVAC S11520-A-NA Pro Switch 20 Amp 115 Volt Shop Vacuum Dust Collector Switch

    Feature

    9. PSI Woodworking LRMSET220 220 Volt Long Ranger Multigate Switch System

    PSI Woodworking LRMSET220 220 Volt Long Ranger Multigate Switch System

    Feature

    Description

    Style:220 volt

    Product description

    This Long Ranger system includes a special relay box that your 220 volt dust collector plugs into. The relay has terminals that you wire to the micro switches on the blast gates. The system is wired in parallel so opening a blast gate turns on your collector, but the dust collector won’t turn off unless all the gates in your shop are closed. Manual switches can be easily wired into the system so you can manually turn your dust collector on and off from anywhere in your shop. Product is shipped with one controller, one 4″ gate and 100 ‘ spool of wire.

    From the Manufacturer

    This Long Ranger system includes a special relay box that your 220 volt dust collector plugs into. The relay has terminals that you wire to the micro switches on the blast gates. The system is wired in parallel so opening a blast gate turns on your collector, but the dust collector won’t turn off unless all the gates in your shop are closed. Manual switches can be easily wired into the system so you can manually turn your dust collector on and off from anywhere in your shop. Product is shipped with one controller, one 4″ gate and 100 ‘ spool of wire.

    10. iVAC Pro Tool Plus Tool Sensor

    iVAC Pro Tool Plus Tool Sensor

    Feature

    Description

    You can automate your dust collection system with iVAC PRO accessories like the Tool Plus Sensor. The Tool Plus Sensor clamps onto the power cord without damaging the wire and automatically detects when your power tool is turned on by sensing the magnetic field around the power cord. When the power tool is turned on, the presence of that field is detected by the sensor and a wireless signal is sent to your iVAC PRO Remote Control to turn on the dust collector. Similarly, when the tool is turned off, the sensor detects the absence of the magnetic field and signals the iVAC PRO Remote Control to turn off the dust collector. The iVAC PRO Tool Plus Sensor can also send a signal to your iVAC PRO Auto Blast Gate to open or close when the tool powers on. iVAC PRO Remote Control, iVAC PRO Tool Plus Sensor and iVAC PRO Auto Blast Gate are each sold separately.

    Conclusion

    By our suggestions above, we hope that you can found Ivac Automatic Vacuum Switch Box for you.Please don’t forget to share your experience by comment in this post. Thank you!

    Home Preview
    Logo
    Enable registration in settings - general