We spent many hours on research to finding 12-volt cooling fan, reading product features, product specifications for this guide. For those of you who wish to the best 12-volt cooling fan, you should not miss this article. 12-volt cooling fan coming in a variety of types but also different price range. The following is the top 10 12-volt cooling fan by our suggestions
773 reviews analysed
1. Universal Slim Fan Push Pull Electric Radiator Cooling 12V 80W Mount Kit (Black, 7")
2. GDSTIME 80mm x 80mm x 25mm 12V Brushless DC Cooling Fan
Feature
- Dimension of outer the frame is 80mm(L) x 80mm(W) x 25mm(H) / The size of fan in inch is 3.15in(L) x 3.15in(W) x 1in(H)
- The center to center distance beween the mountiong holes is 71.5mm/2.81in.
- Operating Voltage Range：5.5V to 13.8V. (overtake to 13.8V, it can also work. but not safe, and seriously affects lifespan of fan.)
- Rated Voltage: DC 12V
- Rated Current: 0.2 Amp
- Rated Speed: 2800 RPM
- Air flow: 43.6CFM
- Noise:31dBA
- Power: 2.1Watt
- Connector: XH2.54-2Pin
- Lead wire: UL Type (+): Red wire
- (-): Black wire. This is a two wire cooling fan
- Bearing Type: Sleeve Bearing
- Life: working up to 35000h at 25 degrees.
- Please Comfirm the Fan Size, Voltage, Connector and other parameters before purchase.
3. (Pack of 2) 10″ Universal Radiator Cooling Fans 12V 80W Slim Fan Push Pull Electric Engine Fan with Mount Kit（Diameter 10.75″ Depth 2.56″)
Feature
- 10 Blades 12V 80W radiator engine cooling fan with mounting kit
- Maximum Fan CFM: 1250 CFM
- Maximum Fan RPM:2250 RPM
- Fitment: Truck/Van/Trailer/RV/Pickup etc.Any Radiator Depending on Size
- Aids to Cool the Entire Engine Bay, including Radiator, A/C System, Intercooler, Oil System, and Transmission
- Easy direct installation, require NO modification Warranty: 3 Year
- How to choose the correct fan?Step 1:Confirm the width and depth of your radiator Step 2:Compare the fan diameter and depth with radiator Step 3: Choose the right size fan ATTENTION:It can be installed only if the diameter of the fan is smaller than the width of radiator! Make sure the depth of the fan is smaller than the gap of radiator and other parts!
4. ANVISION 2-Pack 40mm x 10mm DC 12V Brushless Cooling Fan, Dual Ball Bearing, YDM4010B12
Description
Dimension: 40*40*10mm
Housing: Black PBT (UL94V-0)
Fan Blade: 7 Blades, Black PBT (UL94V-0)
Bearing System: Two Ball Bearings
Net Weight: 13.7g
Rated Voltage: 12V DC
Operating Voltage Range: 10.8-13.2V DC
Start-up Voltage: 6.0V DC
Rated Current: 0.04A (0.10A Max.)
Rated Power: 0.48W (1.2W Max.)
Rated Speed: 6200PRM
Air Flow: 7.56CFM
Air Pressure: 3.19mmH2O
*Noise Level: 27.50dB(A)
Lift Expectancy: 50000H at 25degree test
*Acoustical Noise Testing Condition: Fan is hanged in anechoic chamber, noise is measured at rated voltage in anechoic chamber with microphone at a distance of 1 meter formthe air intake.
5. (Pack of 2) Engine Radiator Cooling Fan 12 Inch Curved Blade Ultra Thin Universal High Performance 12V 90W Motor，Radiator Fan With Fan Mounting Kit（Puller and Pusher Design）
Feature
- The package includes: 2 cooling fans, 2 sets of mounting bracket accessories.
- Basic parameters: The maximum outer diameter is 12 inches. The thickness is 2.49 inches. Maximum air volume CFM = 1650CFM. Maximum fan RPM = 2500RPM. 10 S-shaped blades. 12 volts. 7.6AMPD RAW. 90W.
- OE accessories or replacement. Push-pull. Switch the push-pull working mode: only need to replace the power cord and turn the fan blade over to install. When turning the fan blades, apply anti-loosening glue to the fixed nut to prevent the nut from loosening.
- According to the size of the installation location, the cooling fan with the correct size should be selected so that the ideal heat dissipation effect can be achieved.
- This product is a universal product, which can be used to replace the original car parts, enhanced heat dissipation of agricultural machinery, enhanced heat dissipation of equipment, greenhouse ventilation, and attic ventilation. Just need a suitable installation location and matching power supply, it will not let you down.
Description
The electric slim fan is lightweight, has an ultra slim design so the fan can be installed flush against your radiator, or other applications. It comes with the universal fan mounting kit which make it easy to install. The fan can be used in a wide variety of other applications as well, including A/C condenser cooling, mounting on an intercooler to prevent heat soak during drag racing events, or cooling the radiator in a water-to-air intercooler setup
Puller and Pusher Design：
Puller fans mount on the engine side (back) of the radiator core and pull air through the radiator core. The fresh airflow is pulled through the grille, then pulled through the core, and exits out the back side of the radiator. Puller fans are the desired and most common way of mounting a fan when space is not a limitation between the front of the engine and the back of the radiator core.
Pusher fans mount on the grille side (front) of the radiator core and push air through the radiator core. Fresh airflow enters through the grille, then is pushed through the radiator core, and exits out the back side of the radiator. Pusher fans are used typically where there is a limited amount of space for a properi sized puller fan.
6. Titan- 12V 120mm DC Double Rack Mount Ventilation Cooling Fan for Fridge Vent and Ventilation Grille with Speed Controller (120mm) TTC-SC22(B)
Feature
- DESIGN FOR VENT & GRILLE MOUNTING VENTILATION- Great for refrigerator vent & grille ventilation in your motorhome, camper van, camper truck, caravan or any cabinets.
- FLEXIBLE AND SMART SPEED CONTROL MODE- Auto Temperature Control/ 6-levels manual controller to adjust for particular needs
- ALL WEATHER ACCEPTABLE- IP 55 Waterproof &dustproof fan, perfect for outdoor use
- SILENT OPERATION- Take TITAN professional 9-blades kukri silent fan, this multi-purpose fan or fridge vent fan provides you the quietest operation experience without being disturbed.
- EASY INSTALLATION- Rack hook design for easy install on refrigerator vent
Description
-WARNING: Do not attempt to revise polarity to change the airflow direction. It would not revise the airflow direction. The airflow would blow out from the cross grille side of the fan. If you revise the polarity (positive to negative), the fan and controller would not work. Please connect the cable to the same polarity (positive to positive/ negative to negative)
The refrigerator should be installed on or close to the cooling fins of the refrigerator.
You should install the double fan in any case so that the extracted hot air can somehow escape outside, preferably through ventilation slots in the caravan. You can install the double fan in both the lower and upper ventilation shafts. However, we recommend the installation in the upper ventilation slots, because if your refrigerator is operated with gas, the burner is usually located near the lower ventilation slots and then the gas supply might be hindered by the double ventilator.
7. Security-01 2-Pack 60mm by 60mm by 15mm 6015 12V DC 0.10A Ball Bearing Brushless Cooling Fan 2pin AV-F6015MB UL TUV
Feature
- Rated Voltage: DC 12V, Current: 0.10A
- Bearing Type: Dual Ball Bearing, Speed: 4200 RPM, Air Flow : 20.35 CFM
- Connector: 2 Terminal Connector with 2pin-ph2.5
- Advantage: Long Life (50000 hours) and High Rotation Precision
- UL CE approved certification. Package Content : 2 x DC Brushless Cooling Fan
Description
Description:
Model: AV-F6015MB
Name: DC12V BRUSHLESS FAN
Rated Voltage : 12V DC
Operation Voltage: DC 6.8-12.8V
Consuming Current : 0.10A
Consuming Power: 1.2W
Connector: 2pin-ph2.5
Rated Speed: 4200 R.P.M.
Max. Air Flow: 20.35CFM
Iife Expectance: 50,000 hours at 25 degree
Insulation Level: UL Class A
Certificate: UL,CE
Acoustic Noise: 23.35dB***
DC Line Length : 150mm
Rotation Direction: Clounter-clockwise
Size:60x60x15mm
Size:15g
***:Noise is measured at rated test condition in semi-anechoic chamber in free air with microphone at a distance of 1m apart from the axis of fan at intake side.
8. Coolerguys 120mm (120X120X38) High Airflow Waterproof IP67 12v Fan
Feature
- ENVIRONMENTAL RESISTANCE: IP67 design technology allows this to be completely dustproof and waterproof (rated to be submerged up to 1m for 30min).
- HIGHER AIRFLOW/LOWER NOISE: Updated blade and motor designs allow this to put out 157 cubic feet per minute with a noise level of 45db. That’s equivalent to the ambient noise of nighttime in the suburbs or a standard kitchen fridge.
- LONG LASTING: Dual ball bearings give a long projected lifespan of up to 67,000 hrs–that’s over 7 years. Backed by manufacturer with a 3 year warranty.
- STANDARD CONNECTOR: Standard 3 pin native connector allows for easy adaptability with many systems. Contact us if you need to determine which is the positive, negative, or tachometer (speed sensor) wires as they’re all painted black.
Description
Coolerguys 120mm (120x120x38) High Speed IP67 Fan
PRODUCT SPECIFICATIONS:
Fan Size: 120x120x38mm
RPM: 3500 +/- 10%
Rated Current: 0.75 Amp
Airflow: 157 CFM
Noise: 45 dB
Rated Voltage: 12 V DC
Bearing Type: Ball Bearing
Coolerguys is proud to launch our IP67 dust and waterproof fan series. These IP67 fans can be submerged up a meter underwater for up to 30 minutes. These are perfect for systems exposed to the elements such as solar enclosures, yachts, pest control, and exterior AV systems.
CERTIFICATIONS:
CE Listed
RoHS Compliant
9. 4 PCS 3D Printer Cooling Fan, 40mm x 40mm x 10mm Oil Bearing Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino(12V 0.08A)
Feature
- ☀☀ Power Connection: 2 Pin-ph2.5.
- ☀☀ Great replacement item for your all metal hotend or maybe a small cooling fan for your 3D printer nozzle setup.
- ☀☀ Two terminal cable length is 110 centimeters (110cm). Connector is already fitted and product is out-of-the-box ready for installation.
- ☀☀ Made of high quality plastics with high end bearings, this 3D printer part cooling fan can run continuously for days at high speeds without hassle or concern.
- ☀☀ Size:40mm*40mm*10mm(L*D*H), Speed:6000RPM, Noise:27dBA, Bearing: oil, DC 12V, 0.08A.
10. GDSTIME Dual Ball Bearings 120mm x 120mm x 25mm 5 inch 12v Brushless DC Cooling Exhaust Fan
Feature
- Dimension of outer the frame is 120mm(L) x 120mm(W) x 25mm(H) / The size of fan in inch is 4.72in(L) x 4.72in(W) x 1in(H)
- The center to center distance beween the mountiong holes is 105±0.3mm/4.13in.
- Operating Voltage Range：5.5V to 13.8V. (overtake to 13.8V, it can also work. but not safe, and seriously affects lifespan of fan.) The started Voltage is 3.6V.
- Rated Voltage: DC 12V
- Rated Current: 0.3Amp ±10%
- Rated Speed: 2500 RPM
- Air flow: 83.2CFM
- Noise: 35.7dBA
- Power: 3.5Watt
- Connector: XH2.54-2Pin
- Lead wire: UL Type (+): Red wire
- (-): Black wire. This is a two wire cooling fan
- Bearing Type: Dual Ball Bearings
- Life: working up to 50000h at 25 degrees.
- Please Comfirm the Fan Size, Voltage, Connector and other parameters before purchase.
Conclusion
By our suggestions above, we hope that you can found 12Volt Cooling Fan for you.Please don’t forget to share your experience by comment in this post. Thank you!
